Comtesse Sailing Yacht – Krick

PN: ro1072

Length about 950 mm
Width about 230 mm
Height about 1500 mm



Comtesse Sailing Yacht
PN: ro1072
The Comtesse is the image of a typical sailing yacht of the 1970s and 1980s. These rugged, mostly GRP (fiberglass) boats still make up the classic image of marinas across Europe. There are numerous models from diverse shipyards and on the basis of this shapely hull many original yachts can certainly be modelled and equipped with numerous individual details.

At the same time, the Comtesse Sailing Yacht offers very good sailing characteristics for the demanding sailor and is ideal for a relaxed afternoon at the lake. Thanks to its streamlined hull with moulded keel fin, the elegant Comtesse achieves remarkable speeds in light wind conditions. But even with stronger breezes can be easily sailed, as it is a capsize-safe keel boat. With its simple design and balanced handling, this will make it much easier for newcomers to model sailing, especially water worthy vessels.

With Comtesse you can go from “cruising” against the wind to sailing “in front of the wind”, and it can be sailed effortlessly using the rudder and the sail adjustment, so that at any point it can be controlled and then sailed back to the starting point.

The fittings set contains many visible fittings such as lamps, wheel and parts for the steering column, winches, stanchions and more.

The pictured wing keel is an optional part that significantly improves the sailing characteristics and righting moment of the Comtesse. This keel is also a good option for many other sailboats.

  • Kit Contents:
    One-piece ABS hull (no bonding of the hull and deck required) with integral keel fin
    Deep drawn cockpit and sliding hatch
    Lasered frames and parts for interior work as well as sliding hatch and boat stand
    Ready-to-install plastic rudder with shaft
    Ready-cut sail, one-piece aluminum mast, aluminum booms
    All fittings for the sail
    Detailed construction manual


  • Technical specifications:
    Length about 950 mm
    Width about 230 mm
    Height about 1500 mm
    Total displacement 3200 g
    Mast height about 1200 mm
    Sail area 30 dm2
    Draft 210 mm
    Ballast content 1800 g

Additional information

Weight 20 lbs



Krick a German company construct excellent quality ship model kits. Hulls are double planked, with pre cut keels and frames. The decks and superstructure are pre cut. The Krick ship model kits come complete with all fittings, plans and English building instructions.