MAX Gear geared motors are characterized by their smooth running and low power consumption. Universally applicable for many applications. Whether as a ship drive or as a slowly rotating motor for special functions – MAX GEAR geared motors are the solution.

Depending on the reduction, the gears are designed with one or more stages. Robust metal gears are installed in the closed gear box. Thanks to the metal housing, the noise development is very limited.

Available in different reductions. Due to the wide voltage range of the built-in motor, in the 540 size, shaft speeds of approx. 40 – 7400 rpm can be achieved.

Scope of delivery:
Motor with 2.5:1 gear mounted
Motor mounting bracket attached
Instructions

Technical data:

• Reduction 2.5:1
• Weight 270 g
• Dimensions LxHxW 101 x 40 x 47 mm
• Output shaft Ø 6 x 15 mm
• Height of shaft output approx. 14 mm
• Motor housing dimensions Ø 36 mm x 50 mm
• Voltage range 4.8 – 14.4 V
• Power consumption at 12 V approx. 0.5 A without load
• Motor speed at 12 V approx. 15800 rpm without load Power
• consumption at 12 V approx. 2.95 A at max. efficiency Load speed at 12 V approx. 13400
• rpm at max. efficiency Torque at 12V 3.5 Ncm at max. efficiency
• Blocking current max
• . 12 A
• Pre-suppressed
• Made in EU

Tip
Some brush motors of the MAX series are pre-suppressed. Recognizable by the small wire ends that come out of the motor at the plus and minus connection or by a capacitor that is soldered between the two connections.

For complete radio interference suppression, we recommend adding the missing capacitors.

For example, two capacitors from the housing to the plus and minus connection are installed ex works, should the capacitor (473) be soldered between the plus and minus connection.