Ranger Barking Fish Carrier – Vanguard Models

$219.99

VM11
Scale – 1:64
Length Overall – 20.35″ (517mm)
Height Overall – 19.17″ (487mm)
Width Overall – 3.7″ (94mm)

Information

Ranger – Barking Fish Carrier – 1864

Salt-water fishing from Barking was mentioned as early as 1320, when its fishermen were prosecuted for using nets with too small a mesh. The industry seems to have been at that time quite small-scale. A list of the 1660s shows Barking had 14 fishing smacks, crewed by 70 men and boys. By 1814 the number had grown to 70 smacks, by 1833 there were 120, by 1845 approximately 150 and by 1850 at least 220. This phenomenal growth was due to one family, the Hewetts: Scrymgeour (1765–1850) and his son Samuel (1797-1871). In 1833 the Hewett fleet, called the Short Blue Fleet after its ensign, consisted of 10 vessels. The main type of fishing vessel used in Barking at that time was a well smack until the 1860’s, when the costs of operating such vessels rising rapidly, coupled with the fact that the increasing pollution of the London river made it increasingly difficult to store live cod in chests in Gravesend. The custom of putting each day’s catch on board one of the Well Smacks working with the fleet gave way to the use of fast cutters specially built for the purpouse

The fast Fish Carrier Ranger was a typical example of this type of vessel. She was built at Barking in 1864, was 74ft. 3 inches overall and 52 tons. These vessels could sail to wind’ard faster than any vessel then afloat. With such a perishable cargo as fish, minutes counted and the weather least desired was calm or light airs.

Those that survived into the steam age enjoyed new careers as fast yachts.

Download the instructions here: Ranger Instruction manual

The kit

Scale – 1:64
Length Overall – 20.35″ (517mm)
Height Overall – 19.17″ (487mm)
Width Overall – 3.7″ (94mm)

Kit includes:

  • Laser cut and engraved parts in MDF and pear wood.
  • Laser etched and cut maple deck with treenail detail
  • 2 sheets of photo etched brass
  • High resolution 3D-printed parts.
  • Small crew cutter boat included as 3D-print and wooden parts.
  • Double planked hull in limewood for first planking and pear wood for second planking.
  • Walnut dowel for mast, gaff, and boom.
  • Multiple sizes of both black and natural rigging thread along with all necessary blocks and deadeyes
  • Comprehensive, full colour instruction manual, along with ELEVEN plan sheets which include all masting and rigging drawings.
  • Model can be rigged with or without sails.

Note: images shown are of the prototype model. Crates and fishermen are available separately. The pictures of the model show the model with the PREMIUM SAIL SET (available separately).

any/all videos that may be on this site were found on youtube and are not produced by historicships.com. If your video is here and you do not wish it to be here please let us know and we will remove it.

Last modified: September 23rd, 2024 at 4:07 pm